Logo
 
MoreBeer!
Wort Chiller - Stainless Counterflow Chiller (1/2 in. BSP)
WC131

Wort Chiller - Stainless Counterflow Chiller (1/2 in. BSP)

On Sale!
$179.99
THIS ITEM IS ON BACKORDER
Item currently out of stock
Description

Chill your wort without worrying about your hop additions clogging up the works! This beefy counterflow heat exchanger is made from fully passivated 304 stainless steel with 1/2" BSP male thread connections. Plate chillers are great for their high efficiency and compact size, but if there's too much hop matter in the wort running through them they can quickly clog up. Transferring wort from your kettle to your fermenter is one of the critical steps in the brewing process where you don't want any hiccups. This stainless wort chiller can withstand high hop additions without clogging issues and has a higher chemical resistance than copper chillers.

1/2" BSP male thread connectors. We recommend using with Type-A camlock fittings.

Specifications:
  • Coolant Line: 21mm ID x 22mm OD x 6m Length
    • 0.82" ID x 0.86" OD x 19.6 ft Length 
  • Wort Line: 11.9mm ID x 12.7mm OD x 6.5m Length
    • 0.46" ID x 0.5" OD x 21.3 ft Length
  • Height: 180mm (7.08")
  • Diameter: 280mm (11.02") 
  • Connections:1/2” BSPT
  • 304 Stainless Steel 
 
KegLand Part Number: KL08747
 
 

 

Item # WC131
Shipping Eligible for Free Shipping Program
Availability Out Of Stock
Weight 12 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
Because it's Stainless and ton't clog as easily as a chiller plate
Chris Dornbach on Apr 21, 2021
Because it's Stainless and ton't clog as easily as a chiller plate
Chris Dornbach on Apr 21, 2021
Reviews

3.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
1
1
0
Rated 3 out of 5
So there are Positives and Negatives
Ok so I bought this because I thought it would be easier to clean than the plate chiller that I just retired (picked up an infection and could not clear it no matter what I tried). The BIGGEST advantage of this over a plate chiller is you cant clog it with hops if you accidentally send some through. Second is ease of cleaning. The Biggest Drawback is that its no where near as efficient as a plate chiller. the lowest I can chill wort with it is around 100F (GW is about 60F). Additionally you can expect significantly more pressure drop off your pump vs a plate chiller.
May 25, 2022
Purchased
4 months ago
Rated 4 out of 5
Needs some design changes
Overall quality was quite good. The design needs some changes though as you cannot install an elbow on the water connection, as it hits the main body of the coil. Just one more inch of tubing to move that threaded fitting away from the coil body would have done the trick.
February 1, 2022
Purchased
8 months ago
Rated 2 out of 5
Cooled wort really well, but poorly made
The Bad: My first impression from opening the box was a little disappointment as the welds on this were of very poor quality and obviously contaminated. I also had trouble with the hose connection lines as they're close and really need 90 deg sweeps. The welds in my chiller had pin holes.

The good: It chilled wort really well. The good peeps here at MoreBeer quickly gave me an RO to send it back.

Overall, there are much better options for stainless steel counter flow chillers and at a lower prices.
Contaminated welds with pin holes.
Contaminated welds with pin holes.
May 18, 2021
Purchased
1 year ago