Logo
 
MoreBeer!
Polycarbonate Sight Glass for 35L & 65L BrewZilla
AG493

Polycarbonate Sight Glass for 35L & 65L BrewZilla

THIS ITEM IS ON BACKORDER
Item currently out of stock
Description

The BrewZilla Polycarbonate Sight Glass comes assembled with stepless clamps and fits both the 35L and 65L units. This piece is installed in place of the stainless recirculation tube and allows you to check your fill level or watch your wort clarify during mash recirculation.

Intended for use with BrewZilla model 3.1.1 or later. Support brackets on older models may be too small for the 0.59" OD polycarbonate tube.

Includes:

  • Stainless 1/2" Male BSP threaded post with o-rings
  • Stainless 1/2" Female BSP threaded post with o-rings
  • 360 mm long polycarbonate tube (13 mm ID x 15 mm OD)

Please note: you may need to use varying amounts of plumber's tape to get it to seal in the right position once it has been tightened back down on the female bottom end.

Warning: if using PBW, it is recommended to not have an extended contact time at temperatures above 120°F or exceeding the recommended dilution ratio.

 

KegLand Part Number: KL17114

 

Item # AG493
Shipping Eligible for Free Shipping Program
Availability Out Of Stock
Weight 0.23 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Why did you choose this?
MoreFlavor Store
Upgrade my mash and boil
Mark H on Mar 10, 2021
Branded sight glass to fix the oversight in the brewzilla design
STEPHEN MCLAUGHLIN on Mar 5, 2021
Upgrade my mash and boil
Mark H on Mar 10, 2021
So can see clarity of wart/mash
Nicholas H on Mar 8, 2021
Branded sight glass to fix the oversight in the brewzilla design
STEPHEN MCLAUGHLIN on Mar 5, 2021
neededto be able to check wort level at a glance
Edward D on Feb 25, 2021
Who doesn't want to peek.
ROBERT E P on Feb 25, 2021
Need to track volume
Valued C on Feb 24, 2021
Use for more precise control
Matt M on Feb 24, 2021
Hope it will allow mr to see water volume during sparge
Gary G on Feb 17, 2021
Good price
Bradley S on Feb 16, 2021
To see my wort level easily
Cole Christian on Feb 13, 2021
One of the challenges using the BrewZilla is knowing how much wort you have when sparging. This clear tude should show the wort level when the valve is open.
THOMAS G on Feb 9, 2021
made alteration with tubing but it is hard to read
Keith D on Jan 27, 2021
checking water level
Stephen H on Jan 26, 2021
Wanted it
Mac on Jan 22, 2021
So can see clarity of wart/mash
Nicholas H on Mar 8, 2021
neededto be able to check wort level at a glance
Edward D on Feb 25, 2021
Reviews

3.8 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
3
1
2
0
Rated 2 out of 5
Mine leaked. I’m pretty sure I can fix it so it does not leak but off-the-shelf mine was not useable.
March 29, 2021
Purchased
4 months ago
Rated 5 out of 5
Works good as an upgrade for Mash and Boil.
March 23, 2021
Purchased
4 months ago
Rated 4 out of 5
Works good
No leaking. Used a healthy amount of plumbers tape on the threads. Installing the glass’ protective plastic under the clamps, which cannot be removed easily, is a real design flaw. You either won’t get all of the plastic off or you will have to chuck the clamps and put on new ones.
March 21, 2021
Rated 5 out of 5
Good view
Allows you to see the wort while using the pump
March 16, 2021
Purchased
4 months ago
Rated 2 out of 5
Quality isn’t that great cracked during second brew
To start off, More Flavor is a great company and does provide quality products and excellent customer service. I received this sight glass and was excited to use it. Disconnected the stainless one that comes with the unit and went to put this one on and realized that the pump out port is not aligned with the clamp. I needed to push the tube to the right in order to align it. When I went to fit the clamp on the sight glass it was slightly snug so I had to open it up some. Then when trying to screw the clamp on the screws barely reach so I was only able to get 2 or 3 threads to grab or else I would have over tightened it. During my second brew with the sight glass I noticed some wort dripping down and thought I had spilled. When cleaning the unit after the brew I noticed it was cracked at the clamp and cleaner was spraying out. Had to take it off and put the original back on.
User submitted image
User submitted image
March 12, 2021
Purchased
5 months ago
Rated 3 out of 5
Leaks
The sight glass came loose (easily turns in place on the barbs) and leaks at a high rate. I guess I will need to do my own clamping; it would just be easier to not have this pre-clamped, so I wouldn't need to remove the clamps original. Even the plastic protection for the glass comes stuck within the clamps.
March 6, 2021
Purchased
5 months ago
Rated 4 out of 5
Leaky
The one I received leaked. Pulled the existing clamps off and replaced with work clamps.
February 20, 2021
Purchased
5 months ago
Rated 4 out of 5
sight glass
I have to mark the gallons on it yet. should make it easier to see
amount of wort for sparging
February 16, 2021
Purchased
5 months ago
Rated 5 out of 5
Just what I needed great addition
February 8, 2021
Purchased
5 months ago