KOMOS® V2 Kegerator with Stainless Steel Faucets

KOMOS® V2 Kegerator with Stainless Steel Faucets

Please select from the following option(s) to see pricing and availability.

The new KOMOS V2 Kegerator builds upon the stellar feature set of the best-selling original model, sporting upgraded components for faster cooling and more efficient operation, and a redesigned interior that can hold up to FOUR 5-gallon kegs at one time. There’s no doubt that a four tap kegerator has never been so affordable! We love the KOMOS kegerator’s ease-of-assembly thanks to Duotight fittings and EVABarrier draft line, as well as the many other features that set it apart for a unit in this price range, including stainless steel forward-sealing faucets, stainless steel tower, digital controller, stainless steel door, stainless steel floor, rolling casters, tower cooling fan, and robust KOMOS regulator.

Now available with either Intertap or NukaTap stainless steel forward-sealing faucets. Both brands feature modular spouts and all spout attachments and accessories are cross compatible. Where they differ is the internal sliding mechanism, or shuttle—Intertap's shuttle is stainless steel and the NukaTap's shuttle is made from TPV plastic. Both faucets provide a great pour and will serve you well for many years to come. For more information, both faucets are linked below under "You Might Also Need". 

What's New in V2?
  • Larger Capacity - Fits up to four 5-gallon homebrew kegs
  • Dual Gas Line Inlets - Feed two gas lines at different pressures, or one CO2 and one Nitro.
  • 10% More Energy Efficient
  • 15% Faster Cooling Times
  • 40% Thicker Insulated Walls
  • 25% Larger Condenser
  • 30% Larger Evaporator
The most eye-catching difference between the V2 and the original model is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The V2 positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. The V2 also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
Extra Wide Temperature Range is Perfect for Homebrewers
The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller that can adjust internal temperatures from 26 - 82°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.
Stainless Faucets and Towers
All kegerators come with either Intertap or NukaTap faucets for mounting on the stainless tower. These faucets are the most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Both brands of faucets feature a modular, threaded spout that can fit a variety of attachments including a growler filler or stout spout. This model includes the all stainless faucet which we think is a must have upgrade over chrome plated brass. This is the model sitting in the middle of the MoreBeer! office. Yes, it's tough... but we do have to test these products for you. 
Duotight Fittings & EVABarrier Draft Tubing
Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.
EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.
KOMOS Regulator
The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. 
Added Features
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.
Best Value & Backed by MoreBeer! 
We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA.  Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it.  

Feature Summary:

  • Stainless Steel Air Cooled Tower
  • Stainless Steel Forward-Sealing Faucets (Intertap or NukaTap, choose number of taps above)
  • Duotight Fittings make connecting draft lines a breeze
  • Digital Thermostat with wide 26 - 82° F temp range.
  • Robust KOMOS Dual Gauge Regulator included
  • CO2 Tank holder mounts on back of kegerator (tank not included)
  • Efficient and powerful compressor
  • Stainless Steel Door
  • Countertop Style Drip Tray
  • Stainless Steel Floor for additional keg support
  • Includes EVABarrier beer and gas tubing
    • Beverage line measures 4mm ID x 8mm OD
    • 1 x 1.7m length of line per tap
    • Gas line measures 5mm ID x 8mm OD
    • 1 x line of varying length depending on number of taps (2, 2.5, or 3m)
    • 4 Tap model includes uncut rolls of bev & gas line
      • We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.)
      • Gas lines can be cut to whatever length best suits your needs
  • Duotight adapters for draft shank and regulator connections
  • Duotight tee fittings for splitting gas lines (2, 3, 4 tap only)
  • You will need to purchase keg connections depending on whether you are serving commercial sankeball lock corny, or pin lock corny
    • For ball lock and pin lock disconnects we recommend DUO106
    • For commercial sanke keg couplers we recommend DUO104
  • Available Kegerator covers and "off road" casters for moving over uneven terrain
  • Detailed instructions on assembly and use


  • 23.75" wide
  • 25" deep
    •  31.5" with CO2 mount
  • 32.5" Tall (fridge only)
    • 35" with Caster wheels
    • 48.75" with tower
    • 51" with Casters and Tower
  • 110 v - 60 hz
  • 0.8 Amp draw
  • Optimal ambient temperature is  65°F – 80°F

Internal Dimensions:

  • 19.5" wide
  • 17" deep
    • 16" down the center where compressor sits
  • 28.5" tall

What Fits:

  • 5 Gal. Torpedo Keg - 3
  • 5 Gal. Slimline Torpedo Keg - 4
  • 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
  • 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
  • 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
  • 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
  • 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
  • 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1

See below for the Kegerator Instruction Manual.


Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 23 questions Browse 23 questions and 109 answers
Why did you choose this?
MoreFlavor Store
I wanted 3 beers on tap.
Fred M on Jun 18, 2021
My wife wanted an anniversary gift
Jeff M on May 27, 2021
I wanted 3 beers on tap.
Fred M on Jun 18, 2021
Seen it on YouTube and liked it
Paul N on Jun 15, 2021
My wife wanted an anniversary gift
Jeff M on May 27, 2021
Old kegerator on last legs and this appears to be quality and value
Mark A on May 27, 2021
Four full corny kegs!
Odin A on May 18, 2021
Best price I could find
Emerson B on May 8, 2021
I started brewing beer again, it was good. but bottling is a drag. so I got a keg. but it wont' fit in my fridge. so now I need a beer fridge. omg what have I gotten myself into?
Eric Steadle on May 8, 2021
I have read all of the great reviews and need to free up some refrigerator space.
Rex O on May 7, 2021
The V2 looks like a superior build over it's competitors and a great value for it.
Ryan N on Apr 13, 2021
Liked the triple tap. Wanted 2 for beer and 1 for rootbeer for kids
Kristoffer W on Mar 5, 2021
For beer on tap!
Adam C on Mar 2, 2021
Good price
noah Windschitl on Feb 23, 2021
seems to be well built for a residential consumer and PRICE
Jesse A on Feb 2, 2021
great price and good design
Mark W on Jan 14, 2021
Good ratings on several sites and recommended by fellow brewers
Carrie on Jan 14, 2021
thought one tap wold be OK, but now that I have a double tap and too small a kegerator, the triple tap with room to spare is the way to go.
John F on Jan 14, 2021
Fermentation and serving temperature range, fits 4 kegs, designed for brewing at the start
Casimir E B on Jan 14, 2021
I wanted the 4 taps
Kevin P on Dec 25, 2020
Great Deal an
DON SARGENT on Dec 25, 2020
Cheapest i found online with free shipping.
Walter M on Dec 25, 2020
Great price good reviews and options
John P on Dec 10, 2020
Seems good compared to other
PETER H on Dec 10, 2020
Good description online, good reviews, & seemed like a reasonable price. Looking forward to the first pint!
Paul F on Dec 10, 2020
Size and price
David A on Nov 10, 2020
Started homebrewing and don't want to sanitize bottles.
Michael K on Oct 22, 2020
easy.. 4 TAPS!!!!
John M E on Oct 22, 2020
Seemed like good value for price
Donald G on Sep 30, 2020
History with morebeer with other home brewing purchaces
Jerry h on Sep 30, 2020
Good value
Seth F on Sep 9, 2020
low temp
glenn h on Sep 1, 2020
Price and good reviews.
Aaron Z on Aug 29, 2020
Fits four kegs
Darrell G on Aug 23, 2020
Great reviews and good price
James Reneau on Aug 22, 2020
Kegerator fits 4 corny kegs and great features
Ryan B on Aug 22, 2020
friend recommendation
Arthur H on Aug 22, 2020
4 Taps
Tom T on Aug 21, 2020
Because of the dimensions
RICKY C. on Aug 20, 2020
Seems to have good reviews and a reasonable price compared to some others I've looked at
Gary H on Aug 2, 2020
Good quality
JAIME R on Jul 25, 2020
Price point is the best around
Justin W on Jul 25, 2020
Fits 4 taps and 4 kegs, need I say more!
Clifton C N on Jul 6, 2020
Good reputation for a well built kegerator.
dan on Jun 16, 2020
Stephen M P on Jun 10, 2020
A Replacement
Jack C on May 18, 2020
To hold a bigger selection.
Joseph K A on May 15, 2020
Holds 4 corny kegs; steel construction; good reviews on 3rd party review sites; stainless tower; Intertap faucets
Fraser M on May 14, 2020
Dual inputs
Valued C on May 14, 2020
Needed space for more than one keg and/or fermentation
James M on May 13, 2020
Ben M on May 13, 2020
Other kegerators out there don't have all the features and seem cheap. Plus this gives you control over the temperature of the fridge without having to buy extra gadgets.
Maurice T on May 5, 2020
Seen it on YouTube and liked it
Paul N on Jun 15, 2021
Old kegerator on last legs and this appears to be quality and value
Mark A on May 27, 2021
Will the 6-gallon Torpedo balllock keg fit inside? It looks like there enough space but you would need to use torpedo ball lock disconnects
Ross Sigworth on Oct 20, 2020
KOMOS® V2 Kegerator with Stainless Steel Faucets
KOMOS® V2 Kegerator with Stainless Steel Faucets
Torpedo Ball Lock Keg - 6 gal.
Torpedo Ball Lock Keg - 6 gal.
BEST ANSWER: I have a 3 tap faucet on my Kegerator and I am able to fit (Tightly) 2 Kegs side by side in the back and one centered in the front. Along with a forth 2.5 keg balanced on the back shelf where the C02 usually goes. I am using standard ball lock connectors on the Torpedo They sit below the top rim handle no problem. If you are trying to stack you will not get another on top of the 6 gallon due to height.
Can this unit be used on my covered lanai? On a hot day the ambient temperature gets up to 85 degrees. Thanks!
Kevin A. Williams on Jun 19, 2019
BEST ANSWER: I have mine in an unairconditioned Florida room year around and it works well. There are some days that it is over 100F out and it keeps it to 38-40F, but that is rare. Make sure it has room around it to breath and dissipate the heat.
Has anyone fit a half barrel full size commercial keg in one of these? it says it will fit but I have my doubts?
Daniel Leonard on Dec 11, 2018
BEST ANSWER: Hi Daniel - Yes, a half barrel size commercial keg will fit in this model.
Can this kegerator be used under the counter in a bar?
Gregory Roberts on Jun 19, 2020
BEST ANSWER: I suppose so if the refrigerator height is ok. The draft tower is removable (shipped off with a plug in the draft line hole. You would just have to run the draft lines through the hole in the top, insulate and pack them, then mount the draft tower on the bar top.
I'm considering purchasing this unit. I have had a different brand kegerator for about 15 years. That one has always iced up badly on the back plate after a couple weeks at serving temperature, so now I normally use it for mostly for primary fermentation. Has anybody had issues with this kegerator icing up?
Robert Dubnicka on Jun 11, 2020
BEST ANSWER: No icing issue whatsoever. I've had it in the hot garage when it is about 95F, and also same garage when it is 40F. That said, I live in an area where it is dry dry dry all the time. Maybe if you live in a humid area it would ice up. For me, though, it works great.
Could this fit three 5 gal Slimline Torpedo Kegs with room for a 5lb Co2 tank inside?
Stephen Gray on Aug 31, 2020
BEST ANSWER: I bought the previous version of Kegland, KegKing, Komos, kegerator. It is the same kegerator they keep changing the name they're made in Australia. I make smaller batches usually 3 gallon batches. Anyway to answer you yes there is room for 3 kegs and the 5lb tank inside. its a tight fit but it works. I have 2-1/2 gal. and 3 gal. AEB kegs. They are 8-3/4 inch diameter and 17.5 inch tall. Three are in there now and room for 5 lb co2 tank. if you have all 5 gallon kegs they will work because it has about 28" inside height clearance. Its been a nice unit I have it in the basement and it keeps my beer nice and cold. It does have a low humming sound sometimes when it is cooling no problem for me but might be irritating if it was in a den, family room or kitchen. It works for me and with the wide temperature range sometimes I use it for fermenting .I would buy again and the V2 model even states more room. Also I'd recommend the springs for the Intertap faucets they really work in pulling the faucet closed after each use. I've had mine for about 14 months now with no problems. Hope this info helps
Given the temperature range of 26-82 degrees does this have the ability to heat as well as cool?
Ryan Reddinger on Jun 13, 2020
BEST ANSWER: The fridge does not have the capacity to heat the inside. If you want to heat a fermentation or the inside of the fridge then you will need to order a seperate heater.
What is the depth with the tank attached? I am setting this up against a wall next to my bar sink base
Mark A. on Apr 9, 2020
BEST ANSWER: I purchased the 3-tap version of this kegerator. With the tank holder on the back, it will stick out from the main unit by 7”-8”. However, the tank holder on the back can come off easily. I have my tank on the floor to the right of the kegerator (you can put if either side or even inside). Without the tank holder & tank in back, the kegerator clearance to back wall is 1”-1 1/2”.
What would it take for the CO2 tank be external?
John Powell on Jul 18, 2019
BEST ANSWER: It comes with a holder that mounts to the back and holds the CO2 tank. There is also a dedicated port to allow the gas line into the kegerator. If you get a 2 or 3 tap model, they send enough barbed T-splitters to allow you to get gas to all your kegs.
What all do I need to get with this to have everything i need to setup upon arrival?
Devlin Laurenson on Mar 18, 2021
BEST ANSWER: You need a CO2 cylinder filled with CO2. If you are a home brewer, it fits up to 4 kegs that hold 5 gallon batches. I use Cornelius kegs with ball lock but any Corny kegs will work. You need gas in and beer out fittings that match your choice of keg that the duo fitting will screw onto. It is super easy to set up. Just be patient on the tower setup. You only want to do this once. There are other whistles and bells you could add but the above gets beer flowing and that is the whole goal.
I'm considering this for my covered patio, it can get to 100 degrees in July and August in Texas, will this model hold up? I'm hoping with the increased insulation, bigger compressor and insulated tap neck it will be ok for those 2 months?
Michael Reese on Aug 8, 2020
BEST ANSWER: Short answer - I don't think it will do well. Long answer - when my house gets to mid-80s inside I've observed the compressor running frequently and the chamber temperature drifts up by a few degrees. Additionally, while the tower cooling fan does a fairly good job of minimizing foaming, it's not as effective at warmer room temperatures. Tower condensation is also a problem when the humidity goes up. This causes a big puddle on the kegerator and reduces the ability to cool the lines in the tower. As always, YMMV .
Does the CO2 rack hold a 10lb tank?
Michael Ellis on Feb 2, 2020
BEST ANSWER: The bracket is made for CO2 tanks that are 8 inches wide or less. For the most part it will only fit 5# tanks.
How can I connect my taprite regulator to the duotight fitting?
Cassandra Nelson on Apr 22, 2021
BEST ANSWER: Hi Cassandra, my kegerator came with a KOMOS regulator, I adapted it with a 1/4" MIP x 1/4" FLR half union fitting, then I used a DUO106 flare to 5/16 fitting, I think this same fitting will work for a Taprite regulator. I also modified the manifold with D1820B Gas manifold nipples so I could use the DUO106 fittings. I also changed out the keg ball lock fittings to flare fittings and purchased 5/16" to 1/4" reducers DUO100 for the taps. All the fittings in the kegerator are duotight. I also put in-line valves on each gas line to the kegs DUO101. Absolutely no clamps It sounds like a lot of work, but so far no leaks and I can control gas flow to each keg.

I hope this helps, Good Luck
Ben B..
in what country are these kegerators made?
Kevin Mapp on Sep 5, 2020
BEST ANSWER: Australia
Will this unit hold 3 pin-lock cornys and still have room for the co2 cylinder to fit inside?
Dale Laman on Jul 29, 2020
BEST ANSWER: Yes 3 pin lock 5 gallon kegs will fit, but very very tight. Mine came with a cylinder rack mounted on the back of the kegerator and a gas line pass through hole. You can NOT fit a 5lb cylinder and 3 kegs inside.
Is the door reversible?
Andrew Littlejohn on Sep 12, 2019
BEST ANSWER: Hi Andrew - Yes, the door is reversible, however be careful to remove the pin grommets that hold the door in place. Or new ones can probably be picked up from most any appliance dealer.
Will the V2 be offered with Nukatap faucets?
Antonio Martinez on Jan 15, 2021
BEST ANSWER: At this time we do not have a plan to offer the kegerator with the new nukatap faucets, but it may be a feature we add sometime in the future. Cheers!
Can I pay to upgrade to the flow control faucets?
Aaron Quintana on Dec 23, 2020
BEST ANSWER: Yes. Definitely. I recommend it, it’s nice to control the flow into the glass without wasting beer. With multiple kegs, it’s common to have 1 beer more carbonated than another because they are not tapped at the same time.
I purchased the Komos Residential Kegerator with the Quad Tap option. This isn't my first kegerator. The instructions on page 6 for Assembly of the Quad Tower states "Attach the Duotight fitting...and then attach one of the precut lengths of beverage line to the Duotight fitting". I received 22 feet 5 inches of the double wall tubing. One piece, no precut lengths. On page 9 the instructions specify: "Beer Line is more than just a way to get your beer from the keg to your glass. It works as a flow restrictor, and when properly sized it will ensure your beer is served just right. Note that having the correct beer line internal dimension, length, CO2 pressure, and beer temperature is critical to serving your beer properly." My plan is to cut the included double-walled beer line into 4 equal lengths. That should allow enough line to pull the kegs out of the kegerator to attach the Disconnects easily. Does anyone else have other suggestions?
David Desertspring on Oct 31, 2020
BEST ANSWER: I did not use the provided tubing, selecting a higher grade product from the vendor. You will need about 6 feet per faucet, fine tuning for best pour. If you bought the flow control faucets. I have found over the years that longer is better than shorter to limit foaming. CO2 line length has no bearing on the delivery. I might suggest changing the manifold be one with, in your case, 4 secondary regulators to further control delivery. Bottom line, 6 feet would be the shortest I would ever use, but you might be well advised to try your 4 equal lines and go from there. Beer lines are rather cheap.
Is that logo a sticker? Can it be removed?
Chris Dely on Sep 23, 2020
BEST ANSWER: No, it's painted on. Cover it with a magnetic sign of some sort.
My four tap didn’t come with a flange for the tower. Should it have? Also the gas inlet size looks like it will let out a bit of cold air, is there any coverings to tighten their fit?
Shawn Mark on Sep 3, 2020
BEST ANSWER: The flange is on the inside of the tower. It takes a thin forearm to get down in there to tighten the screws so be warned, although it was not too bad. Also the 4 tap does not need, and doesn't come with, a gasket for the base of the tower.
I wondered too about the little gap in the ports but it's not been an issue thus far. Maybe I'll get creative and use some clay or something to plug it in the summer.
How many kegs will this fit?
Chris Graham on Jan 3, 2018
BEST ANSWER: In my experience this fits 4 of the 5 gallon ball-lock cornelius or slimline torpedo kegs. If one of those kegs is swapped for a commercial sixtel then it will fit just 3 kegs total with space for some six packs. If you are using 2.5 gallon kegs, then it will fit 8.

4.7 / 5.0
100 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 5 out of 5
Komos Kegerator
Looks very nice, holds four corny kegs, and working well so far.
June 1, 2021
1 month ago
Rated 5 out of 5
Fantastic kegerator for the price with great build quality. The compressor and fan are fairly quiet and not noticeable from more than a few away.
May 21, 2021
1 month ago
Rated 5 out of 5
Slick Unit
Only complaint is that I wish it held 4 sixtels.
April 13, 2021
3 months ago
Rated 5 out of 5
Own the 4 tap - quite pleased
It's relatively quiet, the kit was fantastic. I will say the 4 tap is a little harder to assemble; I used some foam from a craft store to help insulate it as well.

Absolutely can't beat the price; I have 4 slimline torpedo kegs currently with Kombucha/Seltzer. Already ordered a separate chest freezer/co2/etc and 4 extra kegs so I can have them prepped for swap.
March 24, 2021
3 months ago
Rated 4 out of 5
Good price worried about longevity!
The temperature seems to really fluctuate , causing the kegerator to turn on and off constantly. it seems like it’s never not running, i don’t know why it’s running so much the door is never opened, I think this is going to cause failure down the road. Because it’s always kicking on. Also these are just kegland products with a different name, so if a part fails I’m not sure how getting replacement parts is going to go.
Also my first kegerator came damaged and sending back was a pain.

Morebeer customer service has been amazing thorough all of this though, and I suppose only time will tell how long this kegerator lasts
March 21, 2021
3 months ago
Rated 4 out of 5
Great features for a reasonable price
I’m very pleased with the overall quality and features of this kegerator. I purchased this model because it has the option to hold 4 kegs. It cools to temperature quickly and seems to maintain set temperature within 2 degrees Fahrenheit.

My only disappointment to date was that when the unit arrived the shelf was broken and some hardware was missing. The MoreBeer customer service team was very helpful, but unfortunately instead of just sending me the broken/missing parts, they sent another kegerator. It was a pain to unbox / rebox and then scheduled FedEx pickup service. A lot of time required on my end.
March 19, 2021
3 months ago
Rated 5 out of 5
Cant beat the price
For the price I just cant see how you could do better. I got the 3 tap model, everything I looked at that was comparable was 1000 + and had to pay shipping to. Putting it together was pretty straightforward (Manuel was online) really liked the ease of the duotight fittings. Temp seems to fluctuate on the readout but it holds steady temp inside. I tested this with a glass of water and temp probe. Only bad thing was it was on back order and had to wait a month for it to ship. All in all I would recommend this.
User submitted image
Added Mar 14, 2021
March 14, 2021
3 months ago
Rated 5 out of 5
Love it, but needs some mods for the next version
No doubt that this kegerator is absolutely awesome. Won’t find a 4 tap on the market anywhere near as affordable as this one. Fits 4 corney and slim line gets just fine and love the intertap faucets.

For the next version to come out, I hope the make the following adjustments. Have a compressor that has a delay. Sometimes this kegerator will kick on and off 20+ times within an hour depending on how it’s temperature reading is. Could be the case for a short lifespan. Secondly, it needs to be a bit bigger so you can mount a CO2 manifold or secondary regulator on the inside. I hope they can make adjustments to accommodate that, the duotight gas lines don’t do it for me. You can make it work with the manifold or regulator, but it is a PAIN. Lastly, maybe even make it to where you can mount two tanks on the back. In the event you want to run nitro, you have to ability to secure it on an additional mount. Overall though it’s a great kegerator and I enjoy it a lot!
User submitted image
User submitted image
March 5, 2021
Rated 5 out of 5
Works great! Fits 4 corny kegs pretty snug
February 11, 2021
5 months ago
Rated 5 out of 5
Nice kegerator
Got the two tap version and love it so far. Other than cutting the hose too short that goes up the tower, all else is great. Love that it can fit 4 torpedo kegs, which is two batches of 10 gallon beer
February 8, 2021
6 months ago