Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in midJune.
The new and improved 55L FermZilla brought to you by the critical minds and engineers behind the original Fermentasaurus Gen 1. Although the original Fermentasaurus was revolutionary at the time of its conception, there's always room for improvement. This is partly due to the strong community of Fermentasaurus users who have helped push for an improved conical unitank.
The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and with the addition of the 55L FermZilla Pressure Kit (available in both stainless and plastic)
, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives you the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.
New and Improved:
1. Larger Dump Valve - 3" butterfly dump valve is more resistant to clogging from large amounts of trub
2. Larger Opening - 4.75" top port opening allows for easier cleaning
3. Less Headspace - more appropriately sized for 10-gallon batches. Purging the headspace of oxygen is easier and more effective.
FermZilla 55L Tank with Butterfly Dump Valve
Reinforced Stainless Steel Stand
Top Lid with PRV (35 psi)
1000 ml Collection Container & Lid
55 L (13.2 gal) Total Volume
Pressure Rated to 2.4 Bar (34.8 psi)
Temperature Rated to 122°F
Height in Stand - 40.1"
Height w/ Airlock - 43.5"
Tank Diameter - 13.9"
Diameter in Stand - 15.7"
Lid & Collection Container Ports - 28 mm PCO 1881 threads
Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.
If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple:
Fill the tank to the brim with water
Replace the Red PRV with a PRV rated to 4.5 BAR or higher
Pressurize the tank to 4 BAR (58 psi)
Check for leaks, then replace the Red PRV when finished
If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.
Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.
Having Trouble Removing The Lid?
The easiest way to take off the lid is to undo the lid ring then use a screw driver or faucet wrench to lever the lid up as shown in the animated GIF below:
Kegland Part number: KL06842
Prebook Item: Please note this item is not currently in stock, but is available for Pre-Order. We do require payment in full in order to reserve stock.