Bottle Filler - Buon Vino Super Auto

Bottle Filler - Buon Vino Super Auto

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

The Buon Vino Super filler for winemaking is a gravity fed bottle filler that shuts off automatically when the proper fill height is reached in each bottle. Very easy to use and perfect for small quantities.  A great choice when you want something more sophisticated than the tube style bottle fillers, but don't need to upgrade to a more expensive electric wine bottle filler. 

Gravity Filler Animation

Usage: To use the filler, place the device on top of the bottle to be filled, insert the intake tube into your vessel containing the liquid, and the small overflow tube into an empty bottle. To begin the siphon, start by pressing down on the center plunger on the flow regulator to open the valve.  Suck on the end of the overflow tube until the liquid begins to flow into the bottle. When liquid is flowing into the bottle, put the overflow tube back into the empty bottle. When the liquid reaches the top of the bottle, the valve will shut the flow off automatically. 

After the first bottle, check the level of the fill and adjust the level up or down if necessary by moving the rubber bottle seal up or down. Please note that the fill level can be affected by excessive foaming. After one bottle is filled, move the bottle filler to another empty bottle, push down on the plunger lever, and repeat.

Comes with 6 ft. of tubing.

Item # B422
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 1 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 31 answers
Why did you choose this?
MoreFlavor Store
To fill my 40 Gallon batch of wine
Vincenzo L on Jul 1, 2021
for bottling
Bill D on Apr 23, 2021
To fill my 40 Gallon batch of wine
Vincenzo L on Jul 1, 2021
We have one already and it saves so much time!! After two years, it needs replaced
Sheila G on Jun 29, 2021
for bottling
Bill D on Apr 23, 2021
seemed simple and inexpensive
I need better one than Old one
Cvjetin K on Nov 18, 2020
Backup to my existing system
Michelle U on Aug 26, 2020
read about it
Peter T on Aug 5, 2020
easy to use for small batch
Valued C on Jul 13, 2020
ALAN DEAN G on Jun 13, 2020
Looked like the best compromise between speed and cost
George P on Mar 29, 2020
Something new to me and to fill high punt bottles!
Jack C on Nov 25, 2019
seemed like the best option for filling
Nikolaus H on Oct 31, 2019
this filter works great!
Doug McDonald on Oct 18, 2019
looks good for the money
Raymond K on Oct 17, 2019
easy to use, economic, good for home winemaking
This was recommended to me
Brian B on Aug 28, 2019
to fill accurately
gina s on Jun 22, 2019
Price and reviews
Valued C on May 7, 2019
Trying first batch of wine
Christopher Bynum on May 2, 2019
great bottle filler
Peter Gruber on Apr 28, 2019
Looks easy to use
Marcello N on Feb 15, 2019
old one gave up the ghost!!!
Ed J on Dec 18, 2018
to make filling my bottles easier and since I do small scale batches I don't need the more expensive ones
Valued C on May 31, 2018
My wand one is old and leaky.
Karyl N on May 28, 2018
We have one already and it saves so much time!! After two years, it needs replaced
Sheila G on Jun 29, 2021
seemed simple and inexpensive
Can this be used with a pump (and if so, how much pressure can it withstand) or is it gravity feed only?
Stephen Craig Watts on Apr 9, 2018
BEST ANSWER: This bottle filler is designed to be gravity fed only, and not intended to be used with a pump.

4.0 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 4 out of 5
Very easy to use.
With a helping hand, very quick.
June 10, 2021
1 month ago
Rated 2 out of 5
Try with water first and make a few changes
Try with water first. That comment is probably not required.

I tried starting the siphon as suggested in the instructions. Forget about. Pull the white cap off and the wire out of the intake hose, and then attach an easy siphon. This will save you much pain.

Next the overflow hose has been wrapped around the assemble so long it will not straighten out. It stays curled like a snake and every time you move the filler it will pull the bottle over. Pull the overflow hose off and straighten it first.

After making these changes I was able to start the filling process. The set screw adjustment controls the flow and cutoff. Too tight and it will not turn off the flow, too loose and it leaks worse than normal when moving from bottle to bottle. It takes some time to get it set properly.

Buon Vino Super Auto Bottle Filler seems to work OK once you get it sorted out. The fill level is pretty consistent if all of your bottles are identical.

I haven’t tried with wine yet, and I may not. The bottle filling wand is look pretty good now, easy to use and clean.

No wine was consumed before attempting to use the Buon Vino Super Auto Bottle Filler. However, it was required afterwards.

October 12, 2020
10 months ago
Rated 5 out of 5
Accurate filling
For small quantity of bottle filling, it's a great to be able to fill to the same fill level each time. Not fast, but consistent. Takes a little time to get into the rhythm.
September 5, 2020
1 year ago
Rated 5 out of 5
Of the three fillers I’ve had, this is far and away the best one
April 13, 2020
1 year ago
Rated 3 out of 5
The valve leaks. I could bot find a way to stop the flow when the valve was in the off position.
January 21, 2020
1 year ago
Rated 3 out of 5
Perhaps Mine Is Faulty
The height of your source tank makes a difference for setting the regulator. If the source tank is too low, filling is very slow but easier to control. Raising the source tank fills bottles faster, but the regulator is more sensitive. Worse than that, however, there appears to be a couple deformations on the rubber stopper out of which wine continues to dispense after the valve is closed to stop the main flow into the bottle. This causes problems maintaining fill height and squirts wine all over while transferring the filler to the next bottle. Since no other review mentions this, perhaps my filler is faulty.

*UPDATE 06/12/2020*
Morewine graciously sent a replacement free of charge, and I was recently able to use it to bottle five cases of wine. This unit did not have the deformations on the tip noted in my original review. The shut off worked perfectly, and there was no leakage when transferring to the next bottle to be filled as experienced with the previous unit. I use the Morewine FIL40 filter kit; unfortunately, the gravity feed does not seem sufficient to utilize the filter kit with the bottle filler. I overcame this by filtering from one carboy to another using my Blichmann WineEasy vacuum pump to assist in drawing the wine through the filter kit. For the advertised purpose, I would now rate the Buon Vino Super Auto bottle filler five stars, with the caveat that it be used in the advertised manner.
January 7, 2020
over 2 years ago
Response from MoreFlavor
Hey so sorry about your experience. We try very hard to create the best experience for our customers and provide quality products. Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Cheers!
January 10, 2020
Emily B
Rated 4 out of 5
Works ok
we set it up with water it took about 20 bottles. Then started with wine. had to regulate the flow from tank to stop foaming in bottle. After that we were able to get some consistency in bottle filling. It does have a minor variance , but it fiilled cleanly and no spills. This was first time we used it. It beat the other inexpensive fillers that we tried.
October 29, 2018
over 2 years ago
Rated 5 out of 5
Great bottle filler
This bottle filler works great! Operates as advertised.
Barely lost a drop of wine when I bottled!
June 30, 2018
over 3 years ago
Rated 4 out of 5
It works well
We filled 14 cases with this and by about the second to last case we finally got it dialed in ;)

READ THE INSTRUCTIONS...we tried it on a bottle using some water and it worked great, so we just started filling. After the first couple of cases we started having some issues.

PROBLEM: It had a nice even flow where it cascaded down the sides of the bottle, reducing bubbles, then it would just become a solid stream causing a lot of bubbles and a lot of wine to flow out of the overflow tube (which is basically wasted wine since you start the siphon by mouth.)

SOLUTION: READ THE INSTRUCTIONS :) . After adjusting the flow rate and cleaning the sediment filter tip it started working wonderfully again. We had to keep an eye on it and make adjustments to the flow rate and make sure the sediment trap on the tip was cleaned out. The flow rate is adjusted by the screw near the top. It users a "STAR" style screw driver which is NOT INCLUDED.

PROBLEM: Too much wine coming out of the overflow tube.

SOLUTION: See solution to first problem. Also, we put the overflow bottle higher than the siphon and that helped.

PROBLEM: The auto-shutoff stopped working or would stop before the bottle was full.

SOLUTION: READ THE INSTRUCTIONS :) . After making the adjustments and getting good flow it worked again.

In short, this works well...read the instructions...keep an eye on it and make adjustments when needed!
April 2, 2018
over 3 years ago
Rated 5 out of 5
Fun filling
Works great, no foam, no mess, and FAST.
January 27, 2018
over 3 years ago