Logo
 
MoreBeer!
Ss BrewTech InfuSsion Mash Tun - 20 gal.
BE772

Ss BrewTech InfuSsion Mash Tun - 20 gal.

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

An insulated, stainless steel Mashtun for hombrewing that will keep your mash at the temperature you set. Retains an amazing amount of heat since it is double walled with a layer of insulation between the two stainless walls. Unlike insulated plastic cooler the InfuSsion Mashtun is made of food safe stainless steel so you have no worries about the affect of heat on plastic.With cool features like an integrated center drain port, gasketed false bottom setup, etched volume markers, stainless hardware, and a digital thermometer, this is the ultimate mashtun!   

When Ss Brewtech tested against similar sized plastic cooler mash tuns, the Infussion dropped 5° F less over the course of a 60 minute mash. The center draining conical bottom vessel silicon gasketed false bottom minimizes the amount of water under the screen, what many brewers refer to as dead space, and allows for great efficiency. One of our favorite features is the simplest...the internal volume markers rid you forever of having to use a ruler to calculate the right amount of mash water.  

This is a great addition to any brewery, and with the additional upgrade kits in the pipeline like a Sparging System, Heating & Temp Control System the InfuSsion Mashtun will become of your favorite pieces of equipment for years to come!  

The 20 gal InfuSsion Mash Tun will also feasture a recirculation port near the top, as well as a Manometer to measure DP

Features:

  • 20 gallon capacity
  • Internal Volume Markers
  • Foam insulated Dual Wall 304 SS with excellent heat retention!
  • Thermowell included
  • Precision LCD thermometer
  • Foam insulated lid reduces heat loss
  • False Bottom with removable Silicone Gasket
  • Silicone handles for safety also act as a lid hanger
  • Temperature proof - never worry about leaching chemicals from plastic
  • Wall thickness is nearly an inch of dual layered steel and insulation.
  • Integrated Recirculation Port
  • Manometer to Measure DP
  • ​PLEASE NOTE: These cannot be used in direct-fire applications. Do not use over a burner!

Dimensions: 24” H x 19” W

Item # BE772
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 50LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Why did you choose this?
MoreFlavor Store
Because a 10 gal tun wasn't gettin er dun
Frank A on Aug 28, 2019
looks boss
David Herrera on Jun 11, 2019
Because a 10 gal tun wasn't gettin er dun
Frank A on Aug 28, 2019
YOUR PRICE
CHRIS R on Jul 6, 2019
looks boss
David Herrera on Jun 11, 2019
stainless insulated mash tun with SMART features. As a home-brewer turned pro it's easy to appreciate this thing!
Luke Mckelvy on Apr 26, 2019
I'm retired and want to up my system.
Lynda R on Mar 8, 2019
Need bigger tun to make 1/2 barrel batches
Scott S on Oct 12, 2018
Because everybody I know that has one, loves it.
Mark J on Aug 15, 2018
YOUR PRICE
CHRIS R on Jul 6, 2019
stainless insulated mash tun with SMART features. As a home-brewer turned pro it's easy to appreciate this thing!
Luke Mckelvy on Apr 26, 2019
Hi, could someone provide with the dimensions of the package and also how much is the shipping weight?
Ariel Zelaya on Jun 15, 2018
BEST ANSWER: Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Cheers!
Is it possible to have the Vorlauf Arm MTS Assembly and the Blichmann Sparge are added to the Mash Tun prior to shipping?
JD Glow on Apr 9, 2018
20 gal | InfuSsion Mash Tun
20 gal | InfuSsion Mash Tun
Blichmann Stainless AutoSparge
Blichmann Stainless AutoSparge
Ss Infussion Mash Tun - Vorlauf Arm Assembly
Ss Infussion Mash Tun - Vorlauf Arm Assembly
BEST ANSWER: Unfortunately, we do not offer in-house assembly at this time.
Reviews

4.3 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
2
2
0
0
A great idea that needs a couple of tweaks.
I use this as part of a three vessel HERMS system. It is great but has two unfortunate (in my opinion) design flaws.

The first and most notable is the drain. The hole is way to small in diameter. This is fine for recirc but a pain in the butt when you want to clean it out after. If the drain was bigger, this thing would be amazing. You could just use the ball valve to control your flow rate.

The second issue is rather minor but annoying. After only three brew days the volume markings on the interior are already almost gone.

Holds temp well though.
September 16, 2019
Purchased
2 months ago
Good Mash tun
Bought it and it works like it should. The MTS heater is a wast of money though.
July 29, 2019
Purchased
4 months ago
Fits my needs and works as expected
As a HERMS recirculating mash user, the manometer is wonderful. It confirmed my coil restricts enough for a wide open DC pump application. I had some fine particle flow through, so I will be throttling the flow to see if this can be eliminated next time. Temp holding was spot on and it sped up the ramp times greatly over a single walled vessel.
April 1, 2019
Purchased
7 months ago
SSBrewtech Mash Tun
Great addition to the brewery now that I'm doing half barrel brews. Plenty of room for mashing last batch was 42 pounds of grain and still left room to spare
December 25, 2018
Purchased
12 months ago
Big step up from plastic mash-tuns.
High quality mash tun. Held 15 gallons of mash with only 2 degrees drop in 70 mins. Well constructed, nice insulated lid. Too bad it din’t come with tri-clamps.

It’s big and heavy. False bottom comes apart quickly for simple cleaning.
December 17, 2018
Purchased
10 months ago
Worth every shiny penny
While expensive, this tun will keep your mash at temp with less than 1 degree of heat loss over the course of an hour and a half. My efficiency has improved by 10 percent!
October 5, 2018
Purchased
1 year ago
My last mash tun
I kinda love this HEAVY beast. Sure, it’s a splurge, but it’s pretty awesome.
August 16, 2018
Purchased
1 year ago
Better than my old Igloo
Bought this to have more room to make higher gravity 10 gal mashes. Only problem I have with this is I've found it impossible to set the grain bed. No matter how much time I spend recirculating the wort, I'll have grain bits flow through into my boil pot.
March 19, 2018
Purchased
1 year ago
Killer Product
So I've used this mash tun for four brews now and I love it. Temperature drops range from 4-8 degrees for 60-90 minute long mashes. I also got the sparge arm so I could fly sparge (I think it's meant more for the 10 gal, but I'll mention that over on that product). Make sure you're not walking home from the post office when you get this bad boy because it's heavy! It's got that Ss durability feel to it which I really love. This thing was built to last. Make sure when you're dropping the false bottom in with it's gasket you have the gasket facing the right direction. I must've tried ten times before I realized it was the wrong direction. The fit is tight and it's really easy to slip the thing off over there when you're lowering it into place, but hey, that's what you want in a false bottom. Be sure to have a friend there to lift this thing up and into the dumpster. The weight of this product with 50-75 pounds of wetted grain makes it a pretty difficult lift to do solo five feet above the ground into a dumpster.
October 31, 2016