MoreFlavor!® Gas Transfer Tool

MoreFlavor!® Gas Transfer Tool

On Sale!
In Stock
60 day no hassle return policy. Details

Simply the best, safest way to transfer your barrel aged beer! Pushing your beer out of the barrel with inert gas like CO2 eliminates the possible points of oxidation or infection that could come from using a pump. 
After using similar tools available on the market, we took what we liked and disliked and made our own. Obviously we're proud of the price, but perhaps more impressive are the polished finish and the excellent quality welds. 
Many brewers like to use this with an attached sight gauge. We found that it's much easier to clean the tool when the sight gauge is detachable, so we offer it as an accessory instead of having it welded onto the wand (sight-gauge H664, clamp H652, gasket h656).
Quality Features
  • Stainless lock down mechanism to adjust height
  • Polished stainless tube
  • Compression Silicone Bung to form airtight seal with barrel
  • Adjustable lees pin
  • Made from 304 stainless steel
  • 1.5" Tri-Clover Outlet
  • 1/4" Stainless Steel Ball Valve with FPT inlet for inert gas
  • 31" height from lees pin to pictured stopper
Item # R657
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 9 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 17 answers
Why did you choose this?
MoreFlavor Store
quality and price
Wayne B on Sep 18, 2020
new to barrel aging. hope this helps
Emmett S on Aug 21, 2020
quality and price
Wayne B on Sep 18, 2020
Gentle way to handle delicate wines
Michelle U on Aug 22, 2020
new to barrel aging. hope this helps
Emmett S on Aug 21, 2020
It is the industry standard for barrel transfers.
Donald Durant J on Jun 10, 2020
.....to move beer
Josh W on May 22, 2020
barrel aging program
Xavier A on May 13, 2020
Looks like a great deal compared to what local winery supply shops charge
Aaron P on Mar 19, 2020
It's a reliable, inexpensive and effective tool in transferring liquid from barrel to tank, or vice versa.
Patrick R on Jan 31, 2020
IAN P D on Dec 5, 2019
Tried to make our own, but this was recommended by a fellow brewer.
Anthony H on Nov 30, 2019
matt m on Nov 5, 2019
Better price than the competitor and has great reviews.
Matt R on Oct 23, 2019
Transfer barrel aged beers.
Nigel D D on Oct 16, 2019
Old one stuck and can’t be taken apart.
Alibi Ale W on Sep 25, 2019
easier than tipping a barrel to empty it
Travis H on Sep 9, 2019
cheaper than gw kent
Molly F on Sep 7, 2019
Because it is cheaper than the Bulldog
Mattthew U on Aug 28, 2019
Used it at a previous job
Christian L on Aug 28, 2019
Fits need
Todd G on Jul 12, 2019
More economical than other alternatives in the market.
Dustin S on Jun 20, 2019
It is a great tool at a great price!
Christian P on May 24, 2019
best price
michael n on May 10, 2019
Cheaper then bulldog
Ted P on Apr 14, 2019
I need it.
Alex P on Apr 6, 2019
Beer barrels baby
Patrick H T on Mar 28, 2019
well priced and well reviewed from personal friends
Matt D on Mar 25, 2019
Better price than GW Kent
Dallas W on Mar 16, 2019
I was unable to select an Australian state in the drop down menu - these items need to be sent to Tasmania please.
Colette M. G on Feb 15, 2019
Comments on Pro Brewer site
Charles B on Feb 4, 2019
josh e on Jan 24, 2019
Good reviews online and cheaper option than a bulldog.
C j P on Jan 22, 2019
Cheaper than GW Kent
Jason B on Jan 19, 2019
didn't want to pay the money for the GWKent version
Matthew H on Jan 17, 2019
need it
Hugues T on Jan 12, 2019
it was the cheapest one I could find
Jonathan M on Jan 10, 2019
We have a growing Barrel project at my brewery and am tried of borrowing a friends.
James W on Jan 9, 2019
Because we to barrel age beer
Christopher J L on Dec 20, 2018
Thomas T on Dec 15, 2018
Barrel filling
Joel C on Dec 8, 2018
cheaper than GW Kent
Charles Y on Dec 4, 2018
To move beer in/out of barrels
White Sails Brewing L on Nov 30, 2018
Brewer's Recommendation
Jonathan M on Nov 29, 2018
Brewery barrel aging
Orlando M on Nov 20, 2018
charles P on Nov 17, 2018
Good price and good reviews
Matthew J G on Nov 17, 2018
good price
Chris B on Oct 14, 2018
Looks like a great build - better than I can build myself
Peter C on Sep 21, 2018
Need to fill barrels
Woodbury Brewing C on Aug 29, 2018
responable price , good reviews
ben m on Jul 27, 2018
counting on it being commercial grade, durable, and function as well as the bulldog or rackiteer....within reason considering the price.
Marc L on Jul 16, 2018
Gentle way to handle delicate wines
Michelle U on Aug 22, 2020
It is the industry standard for barrel transfers.
Donald Durant J on Jun 10, 2020
is this height adjustable to fit any size barrel? I have several 5 and 10 gallon barrels i need it for. HELP!
Francisco Ramos on Jan 18, 2018
BEST ANSWER: Yes, not only does it have an adjustable lees pin at the bottom but the whole valve and bung assembly can be adjusted along the whole length of the racking cane to accommodate various size barrels.
I have several stainless kegs (old firestones) that take a #10 stopper. Any idea if the stopper will fit this sized keg?
Mark Parker on Mar 7, 2018
BEST ANSWER: I'm not sure what a #10 stopper dimensions are. The small end of this one is 1.75 inches. At the top its closer to 2.25 inches. It expands to seal the bung hole when you turn the lower screw handle right above the rubber stopper. I would say if the hole in your keg is about 2 inches this will work.
What is the recommended CO2 pressure? Looks like it has a PRV.
T I on Feb 1, 2019
BEST ANSWER: The PRV on this is rated to 55 psi. All of the other answers are correct that you really just need a little bit of pressure to push your product out of the barrel. Then when you're finished you can either relieve the pressure with the PRV.
How do you clean the assembly? I cannot locate an instruction manual.
T I on Feb 1, 2019
BEST ANSWER: I run PBW through it for 20 minutes or so: put PBW + water in the boil kettle, hook the BK outlet to the outlet of the cane and put the whole thing in the BK so the solution flows through the cane, out of the BK, back into the top of the cane and out of the bottom again.
Does this tool pressurize the tank being transferred from the top or the bottom? I’m concerned about disturbing the lees at the bottom of the tank during transfer if the gas comes out the bottom of the tool.
Shawn wichman on Oct 14, 2018
BEST ANSWER: I use one of these in my home winery. It pressurizes from the top (where the rubber seal is) and presses liquid up from the bottom. You have to set the little screw in the bottom to lift the liquid pipe off the bottom of barrel so you don't push up lees that are on the bottom. Works great.

4.7 / 5.0
17 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
great tool for low cost compared to other brands
great tool for low cost compared to other brands
March 12, 2020
over 2 years ago
Great Product, Small Design Flaws, Initial Quality Problems Though
I love this machine! However, we had to do a lot of disassembly and cleaning of the machined threads to get it to work. They were completely frozen and galling up the works when we first tried to use the thing.

They should have made a bit more space to slide the collar up for good access to the threads for cleaning. The nitrogen tube is too close to the collar. Also, the silicone bung was dirty and had some marks on it like it has been used before.

All that said it really has a nice quality look and feel. We were able to flush out the threaded areas with lots of cleaner and water and soap and now everything screws together nicely.
September 15, 2019
1 year ago
Simple and effective. Great $
Simple and effective. Works as well or better than one we purchased for more $ from a different company.
July 26, 2019
1 year ago
The transfer tool works great. I made the mistake of adjusting the depth without unscrewing the nut and moving the o ring independently, which destroyed the o ring. Replaced the o ring and it worked flawlessly. I would recommend including a back up o ring with the unit. I will definitely recommend this to others.
February 19, 2019
1 year ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
February 20, 2019
Tyler W Staff
Do you even barrel age bro?
Worked like a charm! Much more cost effective than equivalent products I looked at, and arrived sooner than expected.
January 10, 2019
1 year ago
Great tool works like a charm.
Awesome tool does exactly what they say it would do and is easy to use and clean.
Highly recommend this for barrel transfer and anything else similar, casks, etc.
Yay beer!
Yay beer!
December 22, 2018
1 year ago
Way cheaper than others available online, and same quality.
December 21, 2018
1 year ago
Decent tool
I liked the tool and it does the job. The gasket tended to work up in between the nut and the spin nut due to the gap being a little too large but overall the tool worked fine.
December 19, 2018
1 year ago
Very disappointed - appears to be a used item.
Just got this to the brewery and it appears to be a used item. There are barrel contact marks, scuffs on the bung stopper and there is a bunch of black, tar-like buildup on the set screw and threaded plate on the bottom the the racking cane. I can only assume this is schmutz from the bottom of someone else's barrel. We had to have this delivered to our US mailing address and import it into Canada so attempting to return this would be a logistical nightmare which would probably approach the cost of purchase.

I guess we'll have to treat this as a worst case scenario and assume that it came into contact with wild yeast / bacteria.

That being said, the construction and quality seem very good. We have not actually put it into service yet but if the stopper grips and seals well it looks like it will do the intended job.
November 5, 2018
over 2 years ago
Response from MoreFlavor
Hey so sorry about your experience. We try very hard to create the best experience for our customers and provide quality products. Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Cheers!
November 6, 2018
Zach R Staff
Great Value
Very useful tool for filling and emptying barrels. Decent build construction and breaks down well for cleaning.
October 28, 2018
over 2 years ago