Gas Manifold - 1/4 in. (Aluminum)

Gas Manifold - 1/4 in. (Aluminum)

Please select from the following option(s) to see pricing and availability.

Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line.

Multiple manifolds can be linked up with a 1/4" nipple (D1820B).


  • 1/4" BSP ball valves
  • 1/4" barbs
  • Rated up to 100 psi
  • Screw holes for easy mounting
  • Optional additional port on the end

SKU Overall Length
D1802 5-1/2 in.
D1807 7-3/8 in.
D1811 9-5/8 in.
D1813 11-1/2 in.
D1816 13-1/2 in.

The above measurements are from the tip of the brass barb to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve.

Kegland Part number: KL02554

Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 10 questions Browse 10 questions and 62 answers
Why did you choose this?
MoreFlavor Store
Upgrading my system
Christopher Nevin on Jan 9, 2021
Need it
Daniel Franco S on Dec 2, 2020
Upgrading my system
Christopher Nevin on Jan 9, 2021
Bill C on Dec 5, 2020
Need it
Daniel Franco S on Dec 2, 2020
best for my system
LUIS FIGUEROA R on Jul 30, 2020
Need one.
Mark W Johnson on Jul 21, 2020
the price was the best i could find
John T on Jul 3, 2020
recommended by a friend
Melisa A N on Jun 13, 2020
Needed a replacement for one that continues to leak
Michael Aube on May 25, 2020
Adding two more taps to my keezer
Kenneth L F on May 19, 2020
Need to expand keg gas capacity
Neil L on May 19, 2020
I needed it for my kegerator setup
Micah H on May 15, 2020
Boz on May 14, 2020
I need it for my kegorator
Robert W on Apr 29, 2020
Makes my kegerator more useful.
Nicholas Dahl on Mar 31, 2020
Have 4 taps
John P on Feb 28, 2020
Building a new additional keezer
BillT on Feb 21, 2020
separating different pressures for single tank
Jeffrey Lees on Oct 29, 2019
gas setup for a kegerator
Brandon Hirata on Sep 28, 2019
Perfect addition to my new homemade keezer!
Wayne P on Sep 11, 2019
need to add more lines
Heather B on Sep 10, 2019
a little improvement
Bob F on Aug 28, 2019
Built a new keezer. Didn't like the all brass manifold I have
David S on Aug 28, 2019
To run 2 kegs and a force carbonator in a keezer with the ability to add on a step down regulator and another manifold for lower carbed beers
Blair b on May 27, 2019
Replacing a 5 Way
James W on Mar 23, 2019
building my keezer. Need to be able to split the gas lines
Christopher Taylor on Jan 4, 2019
To split my gas lines
Luis P on Dec 24, 2018
Good price and I will have it by next weekend
Bill R on Nov 26, 2018
the shut off valve on my old manifold are broken, I hope these wont break. wish I could of just replaced the handles
Jerry Rider on Oct 26, 2018
Expanding my drafting capability.
Timothy Holschbach on Oct 2, 2018
2 kegs! Tired of switching the beverage out line back and forth
Russell B on Aug 31, 2018
I have 6 kegs, and I like being able to select which ones get gas.
Stanley H on Aug 28, 2018
Kegerator 3 tap setup
Charles Mason on Jul 4, 2018
I need to be able to operate a beer gun and keep pressure in a keg at once
Adrian L Febre on Jun 2, 2018
replace brass manifold
Michael N on Jun 1, 2018
I am building a carbonation refrigerator
Richard Beckley on May 28, 2018
Steve B on May 28, 2018
Price. Easy 1 stop shop, adding 2nd keg to my set up
James B on May 14, 2018
I like the clean look
Richard K on Apr 20, 2018
needed for a keezer build
Christopher B R on Mar 16, 2018
Getting more kegs and need a convient way to manage the CO2 valves
Bryon D on Feb 26, 2018
wanted it
glen c on Jan 29, 2018
Bill C on Dec 5, 2020
best for my system
LUIS FIGUEROA R on Jul 30, 2020
what diameter hose is used on this?
Benny R Stetson on Jan 9, 2018
BEST ANSWER: All of the hose barbs are 1/4" to fit 1/4" ID hose. You could use tubing 1/16" larger or smaller but will have to use clamps or warm the tubing first to get them to fit snugly without leaks.
Do these have integrated check valves?
Craig Hairrell on Nov 14, 2020
BEST ANSWER: No. I assume you mean the connections that stop back flow of liquid in your gas lines.
What size are threads on the barbs?
Ryan T Lawlyes on Feb 25, 2019
BEST ANSWER: Threads on the barbs, or size of line the barbs fit into?
Can the barb fittings be removed from the valves and replaced with a 1/4" male flare fitting?
Henry Friedman on Sep 16, 2020
BEST ANSWER: Yes, they can be swapped.
What are the dimensions of the 3 way, 4 way, 5 way and 6 way manifolds?
Michael Liddle on Jul 31, 2019
BEST ANSWER: Hi Michael - thank you for your inquiry. Please reference the chart in the product description for the overall length of each manifold. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve.
Wait, what is the third hose barb on the end for? Is it really a three way manifold? How does that extra barb get shut off? I don't see a valve handle.
Mike Sederholm on May 30, 2019
BEST ANSWER: Hi Mike - The barb on the left hooks up to the gas supply. The brass piece on the right is a plug that can be removed to essentially daisy-chain another manifold.
When mounting to the wood collar inside of a keezer, do the gas lines point down toward the floor or out toward the center of the keezer?
JR Renna on Apr 28, 2019
BEST ANSWER: Hi JR - Whichever way makes most sense depending on your set up.
What are the dimensions of the 2 way manifold depth height and length?
Richard Hartford on Nov 5, 2018
BEST ANSWER: Hi Richard - Length is ~5 1/2", Height ~3 7/8". It should be known, the mounting bracket is angled, so when mounted it will have an approximate width of 3 1/4".
Is this good for nitrogen?
Robert Lewis on Jul 18, 2018
BEST ANSWER: I've used it for nitro and it works without any issues.

4.6 / 5.0
19 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Keezer rebuild now nice and clean.
Barbs are a bit narrow for a solid crimp.
Other than that it works great.
December 27, 2020
1 month ago
Didn’t work as I wanted.
I purchased with the ball lock input adaptor and could not get it to seal no matter how much pipe sealant I applied. Tried three types of tape and two types of dope. Ended up using the brass barn that came with it and a carbonator cap to serve the same purpose, but not nearly as tidy. The factory fittings are really sealed up, so no worry of leaks there.
June 2, 2020
7 months ago
Response from MoreFlavor
Hey so sorry about your experience. Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. We try very hard to create the best experience for our customers and provide quality products. Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Cheers!
June 4, 2020
Malcolm MB
Only thing is the barbed nipples seem to be smaller than the normal size for gas lines of 5/16". Still able to clamp down the lines to the Barb's.
April 20, 2020
9 months ago
Cheaper than others in price, worth taking the chance.
Took a chance and glad I did. No leaking issues that I’ve noticed yet. Works great and for the price I would purchase again.
April 12, 2020
9 months ago
I am impressed
No leaks. Solid manifold
March 19, 2020
10 months ago
Works fine.
I got this as an add-on to a 4-outlet manifold when I expanded my kegerator. A simple close nipple union and all is fine.
March 5, 2020
10 months ago
Great product. Tested it at 20psi before use. It did not leak.
User submitted image
Added Dec 16, 2019
December 16, 2019
1 year ago
Awesome addition to my keezer!
Very easy to attach. Top construction.
September 25, 2019
1 year ago
No leaks! Love it!
I have a one tap kegerator and wanted to expand to three. Easiest way way to expand with two picnic taps. Works like a charm no leaks. Very happy.
March 28, 2019
1 year ago
Purchased 5 section manifold
Manifold was well made. the hose barbs were a bit small for my hose and I had CO2 leaks until I cranked really hard on the the hose clamps. Make sure you use the correctly sized hose clamp tightened with a screw driver. A bigger OD hose barb would have worked better.
February 24, 2019
over 3 years ago