Logo
 
MoreBeer!
FermZilla All Rounder Fermenter - 7.9 gal. / 30 L
FE147

FermZilla All Rounder Fermenter - 7.9 gal. / 30 L

THIS ITEM IS ON BACKORDER
Item currently out of stock
Description

The FermZilla All Rounder is the most affordable pressurizable fermenter on the market. Although it doesn't feature a dump valve like the FermZilla Conical, the All Rounder carries the same pressure rating, making it an absolute steal if you're looking to ferment under pressure, perform pressure transfers, or want to carbonate and serve directly from the fermenter. The All Rounder is made from super smooth PET that's easy to clean, and the simple design means no nooks or crannies for microbes to hide. With a 4.75" lid opening, you'll have no trouble getting your arm inside to scrub away stubborn krausen rings. As with all FermZilla fermenters, the lid features molded drill locations that make installing accessories like a thermowell or Temp Twister Cooling Coil a breeze.

In order to unlock the full potential of the All Rounder, you'll want to pick up the 55L FermZilla Pressure Kit. The silicone dip tube will be a little long, but you can cut it shorter to the appropriate length. The pressure kit is available with either stainless or plastic ball lock caps.

Why MoreBeer! loves the All Rounder FermZilla:
  • Super smooth PET makes cleaning very easy.
  • Pressure rated lid and PET material make for a better oxygen barrier than fermenters made of HDPE.
  • Lightweight and easy to move around, yet strong enough to be considered shatterproof.
  • The 4.75" lid opening makes it easy to get your arm inside and clean after use.
  • The lid is designed for the easy installation of accessories such as a thermowell or cooling coil.
  • Price! A pressurizable fermenter in this price range is an incredible value, and it opens the door for many cold-side processes that can't be done in a normal carboy or plastic fermenter.

What's Included:

  • FermZilla 30L All Rounder Fermenter
  • Stainless Steel Stand
  • Stainless Steel Handle
  • Top Lid with PRV (35 psi)
  • 3-Piece Airlock
  • Adhesive Thermometer

Specs:

  • 30 L (7.9 gal) Total Volume
  • Pressure Rated to 2.5 Bar (36.2 psi)
  • Temperature Rated to 122°F
  • Height in Stand - 21.7"
  • Height w/ Airlock - 24.2"
  • Tank Diameter - 13.9" 
  • Lid & Collection Container Ports - 28 mm PCO 1881 threads

Kegland Part number: KL15189

 

Having Trouble Removing The Lid?
The easiest way to take off the lid is to undo the lid ring then use a screw driver or faucet wrench to lever the lid up as shown in the animated GIF below:

 

Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 61 answers
Why did you choose this?
MoreFlavor Store
Pressurized fermenting
Colin W on Apr 14, 2021
round
Christopher w on Mar 24, 2021
Pressurized fermenting
Colin W on Apr 14, 2021
I enjoy pressure fermentation and am tired of using a keg to ferment in.
Jeremiah W on Mar 29, 2021
round
Christopher w on Mar 24, 2021
Have one. LOVE it!!!
M T B on Mar 24, 2021
affordable option to ferment under preasure
Brent D on Mar 24, 2021
Want to ensure my finished beer is not exposed to oxygen via closed transfer
Matthew D S on Mar 22, 2021
To start pressure fermenting
Robert P on Mar 19, 2021
I liked the design
Alfred R on Mar 16, 2021
Pressure fermentation and easy fining
Evan A B on Mar 10, 2021
To ferment under pressure and to do pressure transfer into keg
Jose O on Mar 5, 2021
To see fermentation under pressure vs in a keg
Valued C on Feb 19, 2021
Price/availability. First time playing with fermenter under pressure.
Robert T on Feb 16, 2021
To ferment with pressure
Larry B on Feb 9, 2021
Fermentation
Sean Smart on Feb 2, 2021
Good reviews
John Adams on Feb 2, 2021
Best price for pressure fermentation
Trinidad G on Jan 29, 2021
Heard great reviews about it
Jason L on Jan 26, 2021
Value
Vincent v on Jan 25, 2021
This fermenter along with the thermowell will be the next step up for me. Greater capacity, more precise temp control and room for expansion.
Corby Hawkins on Jan 20, 2021
value
Gary A on Jan 6, 2021
Easy pressure fermentation
Howard W on Jan 5, 2021
Referred by friend
Brian L on Dec 22, 2020
gift, person likes Fermzilla products
Melissa K on Dec 15, 2020
Good reviews.
Samuel Jason N on Dec 14, 2020
Looking to go to start pressure fermentation as well as unitank.
Steve J on Dec 12, 2020
looked good
Faye A on Dec 11, 2020
Cider
Anthony N on Dec 11, 2020
Gift
Kristina W on Dec 11, 2020
trying something new
Angel S on Dec 8, 2020
For my husband for xmas
Cordelia M on Nov 29, 2020
Good Reviews
scott r on Nov 26, 2020
Like the big one, but can't make every batch 10 gallons
Louis LeBlanc on Nov 25, 2020
love the fermzilla this way i can do 2 beers at a time
Aaron W on Oct 31, 2020
I like my fermzilla conical but don't always need to collect the yeast. Also I like fermenting under pressure
Eric J M on Oct 28, 2020
i love my current fermzilla, this is the exact thing i want to continue brewing with.
Anthony on Oct 27, 2020
Handy little guy
Jonathan S on Oct 27, 2020
Pressure ferment
Sayge A on Oct 27, 2020
Price, able to see fermentation and pressure ferment
Tyler P on Sep 18, 2020
for pressurized fermentation
Kevin P on Sep 2, 2020
Secondary pressurized vessel
Ben W on Sep 2, 2020
Ease of use
Stephen B B on Aug 27, 2020
I like to keg some of our beer for "now" serving and bottle some for later, excited to do both with one product with attachments for filling the keg and connecting the counter pressure filler
Evan M on Aug 12, 2020
pressurized
Ethan H Schneider on Aug 6, 2020
Online reviews
Thomas H on Jul 28, 2020
Have one and it works great for fermenting under pressure
Edwin Wofford on Jul 23, 2020
Pressure fermenting
Thomas McGloine on Jul 23, 2020
Pressure fermentation
Bill B on Jul 9, 2020
I can't wait
Nick P on Jul 6, 2020
Looking to get into pressure fermentation and like the small size.
Jeffrey V on Jul 4, 2020
Ability to pressure transfer and spund.
Eric A C on Jun 18, 2020
I enjoy pressure fermentation and am tired of using a keg to ferment in.
Jeremiah W on Mar 29, 2021
Have one. LOVE it!!!
M T B on Mar 24, 2021
Does the thermowell work with this?
Adam Lowery on Jan 16, 2020
The widest part of this fermenter is 13.9"? It's hard to tell from the pictures if the holding rack sticks out further than the sides of the fermenter.
Derek Stanton on Jan 30, 2020
BEST ANSWER: If you look closely at the second and third pictures, notice that the stand is shown in two different configurations. Inserting the All Rounder into the wider base allows it to sit lower, but it's not wider than the All Rounder itself. Using it with the narrower base allows the All Rounder to sit higher. I've seen line drawings online that give exact width and height measurements for both configurations, up to both ball locks and the air lock. I'd insert a link but MB does not approve.
The manual says avoid lifting full but the manual is for the 30L & 60L. If you read the info on the handle it says 100kg (220#) limit. If this were filled to the rim it would be under 70#. I would need to lift this full by the handles if I purchased one. Do others lift this full by the handles?
Mike Goetzke on Dec 5, 2020
BEST ANSWER: I’ve never had to fill it to the top, usually it’s about 3/4 full for 5 gallon batch. However even 3/4 full I don’t think I’d risk it. The handles may hold that weight ( though I’m skeptical), it would be very awkward to lift this round ball off the stand, reposition the stand, and lightly set it back together. You drop that thing and you’ll have a major mess on your hands. I’d recommend finding a way to move beer from the fermenter by pressure to a corny keg and move it.
Will this insulating jacket fit the FermZilla All-Rounder 30L?
Will K on Sep 29, 2020
FermZilla All Rounder Fermenter - 7.9 gal. / 30 L
FermZilla All Rounder Fermenter - 7.9 gal. / 30 L
Insulating Jacket for FermZilla 27L Conical or 60L All Rounder
Insulating Jacket for FermZilla 27L Conical or 60L All Rounder
BEST ANSWER: It fits around it and zips down, however, it is about 6 inches too long and has to have the bottom rolled up like highwater pants to be used with the stand that the All Rounder comes with.
Is there a carrying handle included ornis the strap available?
Adam Lowery on Jan 16, 2020
BEST ANSWER: Hi Adam - the All Rounder 30L and 60L units include a stainless steel carrying handle similar to a carboy handle. There is also a carrying harness that will be released later this year, which attaches to the stand so the whole fermenter and stand can be picked up and moved at once (FE149).
Does the stainless steel pressure kit for the 55l work with this as well?
Adam Lowery on Jan 16, 2020
BEST ANSWER: Yes, it's the same kit for both. You'll want/need to cut the tubing shorter or else it won't work the way it's supposed to.
Reviews

4.8 / 5.0
29 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
23
5
1
0
0
Rated 5 out of 5
Good intro fermenter.
A good intro into using a pressure kit instead of a typical carboy. The stand is surprisingly sturdy, and the whole rig is easy to move around. Eventually will upgrade to the fermenter with the valve on the bottom. For now this is perfect.
April 12, 2021
Purchased
2 weeks ago
Rated 5 out of 5
Lightweight but sturdy
This was my first plastic fermenter but it lived up to all the reviews I have seen. I am not doing pressurized fermentation yet, but it is working great sitting out at room temp and can't wait to test it out with some pressure.
March 9, 2021
Purchased
1 month ago
Rated 5 out of 5
All Rounder
Nice Fermenter. Easy to use and Nice cap. Easy clean out
Fermzilla with Columbus IPA
Fermzilla with Columbus IPA
February 24, 2021
Purchased
2 months ago
Rated 4 out of 5
Nice fermenter
Great size, plenty of head space if you’re doing 5 gal batches. Easy to clean, and looks near indestructible. Looking forward to getting the pressure lid.
February 15, 2021
Purchased
2 months ago
Rated 5 out of 5
Works great. Eliminated O2 exposure of my III-IPA without consuming CO2.
Works great. Eliminated O2 exposure of my III-IPA without consuming CO2.
February 13, 2021
Purchased
2 months ago
Rated 3 out of 5
Can be Tricky to Get A Proper Seal
I had some issue with leaks. Also, the first all rounder that showed had large dents. MoreBeer sent me a new one and the second was also a bit misshapen, but not so bad that I worried about it's integrity under pressure. Quality control seems a bit lacking.
February 11, 2021
Purchased
3 months ago
Rated 5 out of 5
Big step up
Just what i needed. I can ferment a high gravity, 6gal batch with plenty of head space for active krausen.
February 10, 2021
Purchased
2 months ago
Rated 5 out of 5
Worth the money even if your just fermenting 2-5psi for fragile yeast
January 30, 2021
Purchased
3 months ago
Rated 4 out of 5
Works great, but the strap
Working out great, but the strap to remove the top though...you’ll need it.
January 24, 2021
Purchased
3 months ago
Rated 5 out of 5
The All Rounder - better than the Fermzilla
The All Rounder is my favorite pressure fermentation vessel. I like it much more than the complex-and-hard-to-dismantle Fermzilla, especially since it is about 1/3 the price! Easy to use, easy to clean.
January 16, 2021
Purchased
4 months ago