CarbSquatch - Force Carbonation Accelerator

CarbSquatch - Force Carbonation Accelerator

Item currently out of stock

Accurately carbonate your beer in just 24 hours with the CarbSquatch! Easily attaches to the outisde of your homebrew keg with the included mounting band. No need to crank up your regulator to 30 psi or waste time shaking and rolling your keg to speed up force carbonation!

CarbSquatch uses the laws of physics to accelerate the carbonation process – simple and easy.

Henry’s Law tells us that at a given pressure and temperature we will have a known amount of CO2 in the beer, when it reaches equilibrium. Reducing the time it takes to accurately carbonate our beer is what every brewer wants, and that’s where Fick’s Law comes in.
We can try and carbonate more quickly using high pressure tricks, but this leads to over or under carbonated beer, and quite possibly more equipment to clean. We really don’t need anything more to clean in our brewing process…
The easiest and most effective method of accelerating the carbonation process is by simply increasing the surface area of the beer exposed to CO2 – Fick’s Law helps explain this for us. Transfer of CO2 into the beer happens only where it makes contact with the beer.  In a passive force carbonation process CO2 enters the beer only through the flat beer surface in the headspace of the keg.  That’s a small surface area over which the entire CO2 load for the keg must move into solution in the beer.
This is why a keg takes about 3 weeks to fully carbonate in a ‘normal’ process; actual time as measured with our high precision CO2 flow monitors.  It takes much longer than most people think.
CarbSquatch has an internal eccentric weight which operates at a specific mass and frequency to create the right wave motion in the keg which significantly increases the surface area of the beer exposed to CO2. Exposing more beer to more CO2 dramatically accelerates the carbonation process, with no foaming or beer abuse. And, since you’re using the correct pressure (and temperature) according to Henry’s Law, you know you’ll have perfectly carbonated beer. With no cleaning. In 24 hours. Simple.
Care and Use
Use the included mounting band to attach CarbSquatch to the keg.  It’s intended to be a tight fit, to hold Squatch in place during the carbonation process.
CarbSquatch should be attached to the keg so the top of the back mounting surface is even with the top ring of the keg (a few inches higher than how it's shown in the photos) or near the surface of the beer if your keg isn't entirely full. This placement creates the correct wave motion of the beer inside the keg; placing it lower on the keg will result in less desirable surface area generation.
Set your regulator to your desired pressure + 1 PSI and attach the CO2 line to the ‘out’ port on the keg – this is important. The added 1 PSI accounts for the hydrostatic pressure of the beer in the keg over the diptube. Injecting the CO2 through the diptube creates a stirring action in the keg further increasing overall beer exposure to the CO2 in the headspace of the keg.
After 24 hours, you’re finished.  Reduce your PSI to the desired setpoint and attach the CO2 line to the normal ‘gas in’ port. Easy, perfectly carbonated beer. Cheers to your new favorite brew buddy!
Notes on Henry's Law & Carbonation
  • The main components of carbonation for us are pressure, temperature, and surface area.  Most people focus on pressure; we’ve talked about surface area, but temperature is just as important and generally does not receive the focus it needs.
  • Your beer must be fully chilled for you to accurately carbonate in a specific period of time and achieve repeatable results, no matter what process you may use.  It takes much longer than you may think for a full keg of beer to chill completely to a specific temperature – test your system to know how long this is.
  • Since carbonation is also dependent on temperature, if you start any kind of carbonation process before your beer is fully chilled, you will not get the results you expect or want in the time you believe it will take.  It’s the law.
  • Check carefully for CO2 leaks.  There is nothing worse than having flat beer when you were looking forward to a great homebrew, all because of a tiny CO2 leak somewhere.
California Recipients: See Proposition 65 Information
Item # KEG585
Shipping Eligible for Free Shipping Program
Availability Out Of Stock
Weight 2LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
Why did you choose this?
MoreFlavor Store
our son is a home brewer and said"I gotta have one"
Cheryl F on Dec 1, 2018
Nicki M on Nov 26, 2018
our son is a home brewer and said"I gotta have one"
Cheryl F on Dec 1, 2018
A gift for my brother who wants this
Barbara L on Nov 28, 2018
Nicki M on Nov 26, 2018
A gift for my brother who wants this
Barbara L on Nov 28, 2018
Does the beer need to carbonate at room temp, or at serving temp?
Daniel Cook on Nov 17, 2018
BEST ANSWER: This should be used at serving temperature.
Can this be used with Sanke kegs also?
Daniel Cook on Nov 17, 2018
BEST ANSWER: Hello Daniel - Yes, just make sure it is mounted at the liquid level of the keg.

4.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Not as Advertised
Was pretty excited for this. Hinted to the wife that it would make a good christmas gift and voila. However, after much experimentation, following instructions... not following instructions, I can confirm that this is not effective.

I attempted carbonation at multiple liquid levels, different types of beer, and ultimately found that the statement "No need to crank to 30 PSI" is false. I still had to crank to 30PSI to get any reasonable carb in all testing. (Before you critique, yes, testing also included trying the squatch at different locations in relation to liquid levels, and also varying liquid levels in the keg) Keg still took two days to carb, at 30 PSI, which isn't much better than just snoosing the gas and waiting.

Pretty disappointed in this. Loved the idea. Not the execution. Only reason it got a second star is because it looks freakin' weird, which I like. End of the day, I'll stick with a five minute shake-weight for carbonating.
January 17, 2019
Response from MoreFlavor
Hey so sorry about your experience. We try very hard to create the best experience for our customers and provide quality products. Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Cheers!
January 18, 2019
Tyler W Staff
Works great nice smooth carbonation
First use on my club soda, gave it a nice smooth finer carbonation compared to my using my QuikCarb. Can't wait to use on my beers.
December 2, 2018
8 months ago
Quick bubbles
Man, what a nice job carbing my keg. No shaking and hoping it comes out right. Let this ugly thing do it's job.
November 11, 2018
9 months ago